FORD CONFIRMS SETTLEMENT OF ALL SUBSTANTIVE COMMERCIAL TERMS TO SELL VOLVO TO GEELY IN 2010

Ford Motor Company [NYSE: F] confirmed today that all substantive commercial terms relating to the potential sale of Volvo Car Corporation have been settled between Ford and Zhejiang Geely Holding Group Company Limited.

While some work still remains to be completed before signing – including final documentation, financing and government approvals – Ford and Geely anticipate that a definitive sale agreement will be signed in the first quarter of 2010, with closing of the sale likely to occur in the second quarter 2010, subject to appropriate regulatory approvals.

The prospective sale would ensure Volvo has the resources, including the capital investment, necessary to further strengthen the business and build its global franchise, while enabling Ford to continue to focus on and implement its core ONE Ford strategy.

While Ford would continue to cooperate with Volvo Cars in several areas after a possible sale, the company does not intend to retain a shareholding in the business post-sale.

More details will be made available once the expected definitive sale agreement is signed in the first quarter of 2010.

BOSS 302R

Forty years after its namesake became a road racing legend, the BOSS is back on track for 2010 with a new 5.0-liter V-8 engine.

In honor of the 40th anniversary of Parnelli Jones’ 1970 Trans-Am championship in a Mustang BOSS 302 prepared by Bud Moore Engineering, Ford Racing is introducing the BOSS 302R, a factory-built race car ready for track days and road racing in a number of Grand-Am, SCCA and NASA classes.

“To keep pace with consumer demand, the Ford team has built modern versions of the most iconic performance Mustangs over the years,” said Jamie Allison, director, Ford North America Motorsports. “From Shelbys to Bullitt, Mach and Cobra Jet, it is now time for BOSS to join the list of America’s most coveted Mustangs. The original BOSS 302 was a championship-winning legend and the new Mustang BOSS 302R will carry on the tradition. The Mustang was born to race from the start, and this new Mustang is bred to win.”

The Mustang BOSS 302R is a serialized off-road-only vehicle ready to race. Each base model will come with a 5.0-liter four-valve engine and a six-speed manual transmission with a roll cage, race seats, safety harness, data acquisition and race dampers/springs, and a Brembo brake and tire package, starting at an MSRP of $79,000.

And, with a special Grand-Am Homologation Package (M-FR500-BOSS R1), it will also be ready to compete in the Grand-Am Continental Tire Sports Car Challenge series (formerly known as Koni Challenge), starting with the season-opening race in Daytona on Jan. 29, 2010. As of today, five BOSS 302R race cars will be delivered to customers ready to race in Daytona. MSRP of the BOSS 302R1 is $129,000.

The Grand-Am Continental Tire Sports Car Challenge-ready Mustang BOSS 302R will feature a sealed high-output race engine with an upgraded cooling system, a close-ratio six-speed transmission with integral shifter, a seam-welded body, race suspension/Koni dampers and ABS brake tuning, race performance exhaust and a high-speed balance one-piece driveshaft.

The BOSS 302R follows in the very successful footsteps of its most recent road racing predecessor—the Mustang FR500C from Ford Racing. In 2005, when the Mustang FR500C debuted at Daytona, the first car was delivered on Wednesday of that week and won the Koni Challenge race on Friday.

In five years of competition since then, the Mustang FR500C has won three Triple Crown championships of driver, team and manufacturer’s titles in Koni competition including back-to-back (2008 and 2009). The FR500C has also seen success in Federation Internationale de L’Automobile GT4 competition winning the 2007 and 2008 driver’s championships.

“We expect the BOSS 302R to continue the successful tradition of winning with factory-built production-based race cars from Ford Racing,” said Allison. “The FR500C and FR500S road racing Mustangs, and the Mustang FR500CJ [Cobra Jet] for drag racing have proven to be great cars for our customers, helping teams win races and championships. We believe that the BOSS 302R will provide that same sort of competitive product for our customers with the tradition you can only get from Ford Racing.”

Each Ford Racing factory-built production-based turnkey race car has won its competition debut.

“Racing has long served as a technical proving grounds for production engines,” said Allison. “What’s good enough for the streets is now good enough for the race track. The 5.0-liter block and architecture in the Mustang BOSS 302R is the same as the 2011 Mustang GT.”

“We have a great team on the BOSS 302R project,” said Andy Slankard, Ford Racing engineering supervisor and the lead engineer on the BOSS 302R project. “Between our partners at AutoAlliance International, where the Mustang is built, Team Mustang, Multimatic and the entire Ford Racing team, we have once again proven to be a leader in turnkey production-based race cars.”

Available through Ford dealers, a total of 50 BOSS 302R Mustangs will be built by Ford Racing. Delivery is anticipated in the third quarter of 2010.

The 2011 Acadia Denali

GMC unveiled the 2011 Acadia Denali in Detroit. The first Denali was launched in 1999 on the Yukon brand and helped define the luxury SUV segment. With nearly half of all Yukon sales being Denali models, expanding the Denali line to include the Acadia was a logical extension. Acadia Denali will provide GMC customers with all the amenities the Denali is known for in a fuel-efficient crossover.

“The GMC Denali models have come to stand for luxury and exclusivity, and that’s just what customers will get in the new Acadia Denali,” said Lisa Hutchinson, GMC product marketing director. “The decision to develop an Acadia Denali was made quickly within the new GM in response to customer and dealer demand for a Denali version ever since the launch and success of the Acadia.”

The Acadia launched in 2007 as the first crossover from GMC, with segment-leading fuel economy and innovative features. An exclusive SmartSlide System allows easy access to an adult-sized third row with available seven- or eight- passenger seating configurations. Fold-flat second- and third-row seats allow flexible passenger and cargo configurations of the best-in-class interior space. Acadia’s refined styling, impressive fuel efficiency, and confidence-inspiring safety features made it an immediate success and ideal platform to build upon for a Denali model.

The 2011 Acadia Denali goes on sale in the third quarter of 2010. It is available in both front-wheel drive and all-wheel drive models, as well as seven- and eight-passenger configurations. The standard 3.6L direct injected V-6 contributes to an EPA highway rating of 24 mpg with FWD models.

The Acadia Denali will stand out with its signature Denali design cues highlighted by the mono-color exterior and chrome honeycomb grille, a feature on all GMC Denali models. It also wears a number of specific exterior design cues, including:

• Unique lower front and rear fascias
• High-intensity discharge headlamps
• Body-color lower cladding and rocker moldings
• Body-color rear fascia and fender flares
• Unique body-side moldings with chrome accents and Denali badges
• Dual chrome exhaust tips

Further distinction comes with 20-inch, two-tone chrome-clad wheels. The six-spoke wheels feature black chrome spoke inserts set against bright chrome.

The Acadia Denali is offered in five exterior colors: Quicksilver Metallic, Summit White, Carbon Black, Red Jewel Tintcoat and White Diamond Tricoat.

Luxury amenities

Acadia Denali delivers all the luxury and refinement that are hallmarks of the Denali line. It includes a number of exclusive design, comfort and convenience features including:

• Premium acoustics - laminated glass, triple door seals, and liquid applied sound deadeners
• Perforated leather seats with matching leather door panel trim
• Heated and cooled driver and passenger seats
• Leather-wrapped steering wheel with mahogany wood inserts
• Complementary wood grain finish on the instrument panel and center stack
• Enhanced accent lighting in the footwells
• Chrome, lighted sill plates with the Denali logo
• Dual SkyScape sunroof system, with sliding front sunroof and fixed rear section
• Head-up display (HUD)

Additional content includes:

• Tri-zone automatic climate control
• Navigation system including XM NavTraffic (available)
• Bluetooth connectivity
• OnStar
• Rear-seat DVD entertainment system, with roof-mounted flip-down screen (available)
• Premium audio system with USB port and Bose 10-speaker sound system
• XM Satellite Radio
• Rearview camera system
• Eight-way power-adjustable driver’s seat with memory
• Remote vehicle start

GMC capability

Acadia Denali is powered by a 3.6L direct injection V-6 engine with VVT that optimizes performance and fuel economy, while also reducing emissions – including a 25-percent reduction in cold-start emissions. Engine performance is enhanced by the advanced six-speed automatic transmission. The maximum towing capacity is a class-leading 5,200 pounds (2,364 kg).

A long, 118.9-inch (3,021 mm) wheelbase and wide 67.28-inch (1,709 mm) front/rear tracks give it a lower center of gravity and enable smooth, stable ride and handling for driving comfort. Independent front and rear suspensions enhance smoothness and deliver a more responsive driving experience. The front suspension features a MacPherson strut design, with a direct-acting stabilizer bar and aluminum knuckles, while the rear suspension uses a compact, state-of-the-art linked “H” design. Isolated mounting points help reduce noise and vibration.

The suspension is tuned specifically for the Acadia Denali’s 20-inch wheels and the available AWD system enhances dry-road handling and provides increased traction on wet, snow and ice-covered roads. Four-wheel disc brakes with ABS are standard, as are the following features:

• StabiliTrak electronic stability control system with rollover mitigation technology
• Traction control system
• Tire pressure monitoring system

Acadia Denali is covered by GM’s five-year/100,000-mile Powertrain Warranty and three-year/36,000-mile Bumper-to-Bumper warranty – the best coverage in America.

2010 Chevrolet Equinox named Urban Truck of the Year

Image via Wikipedia

The 2010 Chevrolet Equinox was named the Urban Truck of the Year by On Wheels Media. The Equinox was selected as the best new truck for urban and suburban drivers by On Wheels Media and an independent panel of 15 automotive journalists.

Randi Payton, On Wheels Media's president and publisher said, "The Urban Vehicle of the Year resonates with the majority of new car buyers who live in urban and suburban areas, who drive on crowded road conditions. The vehicles chosen are cost and fuel efficient, and have the performance and safety characteristics that are relevant to the consumers in Metropolitan areas."

Chevrolet will accept the award for Best Urban Truck of the Year at the 14th Annual Urban Wheel Awards, January 12, 2010, during the North American International Auto Show (NAIAS).

“We are very proud to be recognized as the Urban Truck of the Year,” says Jim Campbell, Chevrolet General Manager. “Urban Truck of the Year panelists select their favorite vehicle based on factors such as safety, fuel efficiency, performance and affordability. Those are the same factors that our customers rate as key reasons they purchased an Equinox. In fact, the Equinox has been such as hit with customers that we added a third shift at CAMI assembly – and are still struggling to meet demand.”

New Cadillac Concept, CTS-V Coupe To Ring In The New Year

Cadillac will premiere a new concept car at the 2010 North American International Auto Show in Detroit on January 12, the latest in its series of dynamic designs. This latest concept advances the brand’s Art & Science philosophy that has included a series of acclaimed concept cars in recent years, such as the Cadillac Sixteen, CTS Coupe Concept and Converj. The 2011 CTS-V Coupe will make its world premiere in Detroit as well, and will enter into production in the summer of 2010.

2011 FORD MUSTANG V-6

Image via Wikipedia

The 2011 Ford Mustang puts 305 high-performance horses in the hands of V-6 coupe buyers with a new all-aluminum dual-overhead cam (DOHC) engine that delivers a projected 30 mpg on the highway with a six-speed automatic transmission and fun for drivers on nearly every road.

For 2011, Mustang’s new 3.7-liter Duratec 24-valve V-6 uses advanced engineering to deliver its power and economy: Twin Independent Variable Camshaft Timing (Ti-VCT) adjusts the valvetrain in microseconds. Aluminum construction means light weight. It’s an engine designed to crank out torque down low, rev to 7,000 rpm and deliver the mechanical music sports coupe lovers crave everywhere in between.

“Mustang is completely transformed with this new engine,” said Derrick Kuzak, group vice president, Global Product Development. “Everything people love about the car is still there and now under the hood is a V-6 engine that uses premium technology to deliver the power, the feel, the fuel efficiency, even the sound of the best sports coupes in the world.”

New 3.7-liter V-6 engine
With Ti-VCT operating its four valves per cylinder, the new Mustang V-6 powerplant sends significantly more horsepower and torque (305 hp and 280 ft.-lb.) to the rear wheels than its predecessor – despite its smaller displacement. The behind-the-wheel feel is unlike any Mustang ever produced.

“This new V-6 engine really speaks to what Mustang is all about,” said Barb Samardzich, Ford vice president of global powertrain engineering. “It produces power everywhere in the rev range and loves to be pushed hard. The Duratec 3.7-liter builds on our promise to use advanced technology to deliver both power and fuel economy.”

The high output is due largely to Ti-VCT which allows variable control of valve operation across the rev range. The variable cams operate on a Direct Acting Mechanical Bucket (DAMB) valvetrain using polished buckets and roller finger followers to reduce friction. The end result is as much as a 3 percent improvement in fuel economy and a 10 percent improvement in power output versus traditional engines without these advanced features.

Ti-VCT is complemented by special-tuned composite upper and lower intake manifolds for efficient air delivery and lighter weight. Ignition power is delivered by a high-energy coil-on-plug design, while piston-cooling jets and a lightweight die-cast aluminum cylinder block improve the durability and efficiency of the 3.7-liter V-6 design.

Performance was the mantra for every aspect of engine design. A cold air induction system and dual exhaust give the 3.7 its free-breathing style with a 7,000 rpm redline and near-instantaneous response to throttle inputs.

A die-cast aluminum deep-sump oil pan provides 10,000-mile oil change intervals, saving drivers money on maintenance and resulting in less waste in oil disposal.

Engineers also worked to ensure aggressive, high-performance sounds come from the new engine, from intake to exhaust. Not only does the retuned air intake system minimize losses, it also provides the driver with a satisfying intake rush on hard acceleration. The all-new dual exhaust system is mellow at idle but opens up with a howl at full-tilt, letting Mustang drivers know they’re behind the wheel of a world-class sports coupe.

“This car marks a new type of Mustang,” said David Pericak, Mustang chief nameplate engineer. “We’re using a high-performance quad-cam V-6 with all the bells and whistles in a car that’s become legendary for its handling and roadholding; it’s really going to get a lot of new sports coupe fans excited about Mustang, some for the first time ever.”

Powertrain improvements
Drivers can get the most out of the new V-6 engine’s output using either an all-new six-speed manual gearbox or a six-speed automatic transmission. Both come with the flexibility and fuel economy benefits of six forward ratios regardless of whether buyers want to shift for themselves or not.

Drivers who prefer a manual gearbox will enjoy the short throws and direct feel of the shifter along with the relaxed cruising permitted by the extra top gear ratio. Customers choosing the automatic will be pleasantly surprised to find the advanced six-speed 6R60 transmission does not sacrifice fuel economy – or performance – for convenience, delivering an expected 30 mpg highway with crisp, quick shifts that maximize torque and horsepower.

The automatic transmission also features a grade-assist or “hill mode” to improve drivability on hilly terrain. This technical innovation uses vehicle input – acceleration, pedal position, vehicle speed and brake status – to automatically determine the correct gear ratio while on an incline or decline. Hill mode eliminates sixth gear, extends lower gear operation on uphill climbs, and provides additional grade or engine braking for coast downs.

The standard 2.73 rear axle provides an ideal blend of cruising fuel economy and acceleration, aided by the wide ratio spread permitted through the use of six forward speeds in the gearboxes. Performance enthusiasts can select an available 3.31 rear axle ratio for better off-the-line launch characteristics.

Fuel economy improvements
Extra horsepower and refined engine operation will be the most noticeable features to new 2011 Mustang 3.7-liter V-6 buyers while projected class-leading fuel economy, also a standard feature, offers an additional bonus. The numbers speak for themselves:

• 19 mpg city/30 highway with six-speed automatic transmission, up from 16 mpg city/24 highway on the 2010 model with automatic – a 25 percent improvement over 2010
• 18 mpg city/29 highway with six-speed manual transmission, up from 18 mpg city/26 highway on the 2010 model with manual

Refinements throughout Mustang’s body, powertrain and chassis design contribute to the improved fuel economy numbers. Examples include:

• The new Electric Power Assist Steering (EPAS) system which eliminates the drag of an engine-operated hydraulic power steering pump
• Six-speed transmissions that allow lower cruising revs without sacrificing off-the-line performance
• Aerodynamic improvements such as a new front fascia, tire spats on the rear wheels, modified underbody shields, a taller air dam and an added rear decklid seal

Handling and driving dynamics
With so much additional horsepower standard, the 2011 Mustang received enhancements to its chassis to maintain the outstanding balance and driving behavior Mustang owners expect. Damper tuning and spring rates were revised to provide a smooth highway ride while a new rear lower control arm and stiffened stabilizer bar bushings improve stiffness and handling for better cornering response.

While Mustang’s aerodynamic improvements were designed mainly to improve fuel economy, engineers also adjusted the vehicle’s front/rear lift balance. The result is a car that tracks more securely and feels more “planted” to the road surface at higher speeds, helping to keep the tires in better contact with the pavement.

The addition of EPAS marks a new era in driving dynamics for Mustang owners. Steering effort at parking lot speeds is reduced, while high-speed and highway feel is improved for more precise steering and handling. Because the belt-driven power steering pump is eliminated, EPAS provides a quieter vehicle with fewer components drawing engine power.

EPAS also enables new technologies that adjust for minor driving annoyances. Pull-Drift Compensation adjusts the steering to correct for crosswinds and minor road crowning, while Active Nibble Control helps eliminate the “shimmy” felt at high speeds when a wheel is out of balance or a brake rotor is warped. Both conditions are alleviated by EPAS independent of driver input, helping ensure Mustang delivers a smooth, comfortable driving experience in all conditions.

Mustang buyers choosing the new V-6 will also get a standard limited-slip differential that provides better handling and more sure-footed grip in poor weather conditions by directing engine torque to the rear wheel with the most traction. When the time comes to slow things down, the 2011 Mustang is also equipped with larger four-wheel ABS disc brakes, with 11.5 inch front and 11.8 inch rear rotors.

Refinements complement advanced features
To reinforce the sporty nature of the 2011 Mustang, all V-6 models will come standard with new instrument cluster graphics, including a speedometer that reads up to 160 mph and a tachometer that reads to 8,000 rpm, reflecting the free-revving style of the new engine.

Additional lightweight soundproofing measures help filter unpleasant, high-frequency noises while tuned intake and dual exhaust add the sounds Mustang buyers relish.

Occupants also benefit from new door seals and a rear wheel arch liner that reduce road noise for a quieter, more enjoyable drive, all with minimal weight gain compared to the 2010 model.

Enthusiasts who want a premium performance-oriented Mustang V-6 can opt for the new Performance Package, which will be available August 2010. Designed for driving enthusiasts, the Mustang V-6 Performance Package comprises:

• A 3.31 rear axle ratio for quicker off-the-line acceleration
• Firmer Mustang GT suspension
• 19-inch wheels
• Summer performance tires for improved grip
• A strut tower brace for increased chassis rigidity
• Unique electronic stability control calibration with sport mode for performance driving

For 2011, Mustang also ups the ante on technology and convenience features, including a standard driver’s message center in the instrument cluster and integrated blind-spot mirrors in the side-view mirror housings.

Ford’s MyKey™ system, designed to encourage safer teen driving and safety belt use, also is newly available on Mustang. MyKey allows owners to program the vehicle key using the driver’s message center to incorporate features such as limited top vehicle speed and audio volume, a traction control system that cannot be deactivated, a persistent Belt-Minder® safety belt reminder and various speed alert chimes.

Top safety marks expected
Mustang’s technological advances are also incorporated in the structure of the vehicle to improve safety. The 2010 Mustang coupe earned the U.S. government’s top five-star crash-test rating, a designation the 2011 model is expected to achieve.

The Mustang’s considerable body stiffness contributes to the coupe and convertible’s driving performance and has a parallel benefit in accident protection. While the coupe’s body structure is approximately 31 percent stiffer than the previous Mustang platform, the convertible’s is more than twice as stiff – creating a structure that helps protect the cabin from deformation and intrusion in an impact.

Mustang also uses high-strength steel in its body structure and ultra-high-strength steel in the door intrusion beams for additional side-impact protection.

The front structure’s crush zones are computer-designed to absorb energy in a controlled manner and help dissipate it before it can reach the passenger compartment. Ford engineers have run thousands of design iterations of the Mustang’s front rails to arrive at an octagonal shape that helps spread crash forces evenly to aid in protecting occupants.

State-of-the-art technology adds to the convenience and safety of the 2011 Mustang, from the availability of the latest version of Ford SYNC®, with applications such as Traffic, Directions and Information, 911 Assist™ and Vehicle Health Report, to standard AdvanceTrac® Electronic Stability Control, which complements the all-speed traction control and standard Anti-lock Braking System (ABS).

Additional standard safety equipment includes the Personal Safety System™ which features dual-stage driver and front passenger air bags, safety belt pretensioners and Belt-Minder.

The 2011 Mustang will be built at the Auto Alliance International Plant in Flat Rock, Mich. The new 3.7-liter V-6 will be built at Ford’s recently retooled Cleveland Engine Plant No. 1.

FORD FUSION HYBRID EARNS SPOT ON CAR AND DRIVER’S LIST OF ‘10BEST’ CARS FOR 2010

Image via Wikipedia

The hits keep coming for America’s most fuel-efficient midsize sedan, the Ford Fusion. The Fusion Hybrid has been honored as one of CAR and DRIVER magazine’s “10Best” cars for 2010, just weeks after winning the prestigious MOTOR TREND Car of the Year® award.

“CAR and DRIVERis always looking for those cars that are most engaging to drive, and in our experience the Ford Fusion Hybrid is the first hybrid vehicle that really delivers a fun driving experience,” said Eddie Alterman, editor-in-chief, CAR and DRIVER, noting that the Fusion Hybrid is only the second hybrid ever to make the magazine’s “10Best” list.

“We were very impressed with how seamlessly the hybrid powertrain functioned,” Alterman said. “We were also impressed with Ford SYNC® and how seamlessly it worked.”

But Alterman says what really sealed the deal for Fusion Hybrid is the simple fact that it’s fun.
“The vehicle is entertaining,” he explained. “It’s really fun to drive, and we had fun trying to improve our mileage using the SmartGauge™ technology.”

A total of 58 vehicles were in the running for the CAR and DRIVER“10Best” list. All of the contenders were put through a week of rigorous testing and judged based on three criteria: how well they perform their intended mission, i.e. luxury, sport; how engaging and fun they are to drive; and how much value they deliver.

“Being ranked one of CAR and DRIVER’s ‘10Best’ cars for 2010 is high praise indeed,” said Derrick Kuzak, group vice president, Ford Global Product Development. “In addition to being fun to drive, the Fusion Hybrid offers unsurpassed fuel economy that our customers truly appreciate with an EPA estimated rating of 41 mpg in the city and the ability to travel more than 700 miles on a single tank of gas.”

Despite the slump in overall industry sales, 2009 has been a record-breaking year for the Ford Fusion. Sales are at an all-time high, with the Fusion Hybrid accounting for almost 20 percent of total Fusion retail sales. Perhaps even more significant, more than 60 percent of Fusion Hybrid sales have been to customers coming from import brands – mostly Toyota and Honda.

Fusion Hybrid awards and accolades
Additional awards and accolades for the 2010 Ford Fusion Hybrid include:

• “Top Safety Pick” rating from the Insurance Institute for Highway Safety
• 2009 Ward’s Interior of the Year Special Achievement Award for Best Graphic Display for SmartGauge with EcoGuide digital instrument cluster
• Great Car for the Long-haul Salesman by Kelley Blue Book kbb.com
• Named one of America’s Top 40 New Cars by MOTOR TREND magazine
• Rated the No. 1 Hybrid Family Sedan by CAR and DRIVER in a recent comparison test by the magazine
• Named 2009 Editors Choice for Fuel Sipper by CAR and DRIVER
• Named Best Hybrid for the Money in the Midsize Car segment by cars.com
• Named one of 2009 Top 10 Green Cars by Kelley Blue Book kbb.com
• Earned The Detroit News Readers’ Choice Award for “Best Value”

CARS, CROSSOVERS DRIVE FORD’S NOVEMBER SHARE GAIN

Image via Wikipedia

Strengthened car and crossover sales fueled Ford, Lincoln and Mercury’s U.S. sales performance in November. Car sales were up 14 percent and crossovers were up 26 percent for the month, with total sales of 118,536, essentially equal to year-ago sales.

“Consumer demand for our new high-quality, fuel-efficient products is driving Ford’s market share gains,” said Ken Czubay, Ford vice president, U.S. Marketing Sales and Service. “Customers are rewarding Ford for its new vehicle lineup, featuring new technologies including SYNC, MyKey and Adaptive Cruise Control.”

Ford estimates its total market share in November was higher than a year ago and higher than its share in the first 10 months of 2009. Ford’s November retail share was up for the 13th time in 14 months.

“The Ford plan is working, led by the strength of our product lineup and customer demand for our new cars, utilities and trucks,” said Czubay. “Consumers increasingly are noticing that the Ford difference is our great products, our strong business and our leadership in quality, fuel efficiency, safety, smart technologies and value.”

November Sales Highlights

• All-new Ford Taurus sales totaled 4,669, up 54 percent versus a year ago. Dealers reported retail sales were nearly double year-ago levels.
• Ford Fusion, recently named Motor Trend magazine’s Car of the Year, also posted a sales increase of 54 percent versus year-ago levels. In early November, Fusion set a new full-year sales record. With November results now complete, Fusion year-to-date 2009 sales total 161,819. The previous full-year record, set in 2007, was 149,552.
• Other Ford, Lincoln and Mercury cars posting increases included Ford Focus (up 24 percent) and Mercury Milan (up 40 percent).
• Crossover utilities also posted strong sales increases: Ford Escape was up 51 percent and set a new November sales record; Ford Edge up 27 percent; Mercury Mariner up 5 percent. In addition, sales of the all-new Lincoln MKT crossover totaled 648, its highest sales month to date.
• Ford’s new EcoBoost engine technology and hybrid vehicles are winning customers, too. For example, the conquest rate for the Taurus SHO is 60 percent. EcoBoost provides customers up to 20 percent improvement in fuel economy and a 15 percent reduction in emissions versus larger-displacement engines. EcoBoost is standard on the Taurus SHO and available on the Ford Flex, Lincoln MKS and Lincoln MKT.
• Sales of hybrid vehicles totaled 2,361, up 73 percent versus a year ago. Ford hybrid models include the Ford Fusion, Ford Escape, Mercury Milan and Mercury Mainer.

Ford Fiesta
The all-new Fiesta – which debuts Wednesday at the Los Angeles International Auto Show – will further grow Ford’s car lineup. This new entry in the U.S. – available in four- and five-door body styles – will set a new small car benchmark for fuel economy, safety, connectivity and powertrain technology in its segment.

North American Production
Ford plans to build 550,000 vehicles in the first quarter 2010, an increase of 201,000 units (58 percent) compared with the first quarter 2009.

Ford’s fourth quarter production plan is unchanged from the previous forecast of 570,000 vehicles.

2011 FORD FIESTA: SMALL CAR, BIG ON SAFETY

Image via Wikipedia

Ford leveraged the global engineering tools and processes used in the redesign of its top safety-rated flagship – the 2010 Taurus – to raise the bar on small car safety with the new Fiesta. Incorporating the Trinity front crash structure, Side Protection And Cabin Enhancement (SPACE) Architecture® and advanced air bag technologies, Fiesta brings world class safety in a small platform package, while kicking off the global roll-out of the Taurus crash safety approach.

The new Fiesta’s expressive body is rigidly crafted with high-strength steels that form an advanced crash structure. The Fiesta also features the most standard air bags in the segment and standard stability control.

“Fiesta is proof that a small car can deliver big safety,” said Steve Kozak, chief safety engineer. “The North American Fiesta combines rigidity, more air bags – smartly deployed – than the small car competition as well as standard stability control.”

Healthy bones
Beneath Fiesta’s stylish exterior is a robust structure, crafted from high-strength steels engineered to preserve quality and enhance driver and passenger safety. Working together with SPACE Architecture® side-impact protection, these elements form a protective safety cage to help protect Fiesta occupants in a crash situation.

Fiesta uses significant cold- and hot-formed high-strength steel in the body structure. These components add rigidity and save weight, increasing structural efficiency while also helping Fiesta deliver high fuel efficiency.

More than 50 percent of Fiesta’s body structure uses these high-strength or ultra-high-strength steels in the floor structure, front rails, beams and in the ultra-rigid, integrated body reinforcement ring designed to help better protect occupants in side impacts.

The Fiesta A- and B-pillars are fashioned from ultra-high-strength aluminized boron steel, adding robustness while allowing for slim width and rake to honor Fiesta’s distinctive design. Rocker panels – with welded baffles to absorb impact – also are crafted from very high-strength, dual-phase steels, known for their energy-absorption qualities. The side roof arch employs dual-phase steel construction.

Fiesta’s under-floor support beams – so-called sled runners – and lateral floor reinforcements also use high-strength, dual-phase steel.

These light but strong metals in the Fiesta’s robust body shell help enhance crash protection by adding strength, rigidity and durability.

More standard air bags, smartly deployed
The Fiesta body shell is well-equipped with safety features to help protect its occupants in the event of a collision, including the most standard air bags in the small car segment.

Fiesta offers a segment-exclusive driver’s knee air bag, developed to help reduce lower leg injuries in the event of a frontal collision and to work together with other safety features. The knee air bag joins a suite of Fiesta safety features including dual-stage first-row air bags, side-impact air bags and side curtain air bags.

A knee air bag won’t be found in Honda Fit, Nissan Versa or Toyota Yaris. Move up to Civic, Sentra and Corolla and you still won’t find a driver’s knee air bag.

“Smart” Passenger Occupant Detection System (PODS) sensors determine occupant weight and safety belt status to optimize deployment force. Smart sensors include the class-exclusive side impact sensor that uses pressure to react up to 30 percent faster than previous sensor offerings.

Also available on the Fiesta is Ford’s AdvanceTrac with ESC® (Electronic Stability Control), which uses sensors to detect and measure yaw, or side-to-side skidding conditions, by monitoring the vehicle’s speed, throttle position and steering wheel angle. When AdvanceTrac senses wheel slip, engine torque is reduced and braking is applied, where needed, to help the driver keep the car tracking on its intended path.

Additional features include rear door child safety locks, height-adjustable retractable seat belts with pretensioners and a Tire Pressure Monitoring System (TPMS).

The power of the voice
Early indicators suggest that Fiesta will attract tech-savvy young drivers. Ford encourages drivers of all ages to keep their hands on the wheel and eyes on the road by using Ford’s SYNC® hands-free, voice-activated communications and entertainment system which is optional on the Fiesta. Ford research shows that SYNC significantly reduces the level of distraction when drivers select a phone number or choose a song on their MP3 player compared with the same operations used in hand-held cell phones and music players.

Leveraging global safety expertise
Ford’s global safety engineers worked together to prepare the Fiesta to meet stringent U.S. crash protection requirements by leveraging Ford of Europe’s small car expertise as well as an array of virtual, actual and hydraulic sled-simulated crash tests.

“Ford has been sharing safety processes and technology around the world since the 1990s,” said Kozak. “This has laid the groundwork for us to quickly manage complex regulatory and crash-testing differences between Europe and the U.S. as we accelerate the introduction of exciting, fuel-efficient products such as the new Fiesta and next-generation Focus in the U.S.”

Cadillac CTS Wins Car And Driver Magazine's Highest Award For The 3rd Consecutive Year

Image by gmeurope via Flickr

Cadillac’s CTS product line, the centerpiece of the brand’s revised lineup, has been selected by Car and Driver magazine for its annual “10Best” list for the third consecutive year.

“10Best winners are those vehicles that crack the greatness code, offering that elusive combination of driving enjoyment, mission fulfillment, and value,” said Eddie Alterman, Car and Driver editor-in-chief. “That the CTS has made the list for a third consecutive year is a tribute to the Cadillac’s fundamental integrity and staying power”

Cadillac’s CTS Sport Sedan is the core of the brand, and initially was selected to Car and Driver’s 10Best in 2008. The high-performance 556-horsepower (415 kW) CTS-V model drove CTS back on to the 10Best list for 2009. And the new CTS Sport Wagon model that went on sale in September helped the CTS achieve the “3-Peat” this year.

The 2011 CTS Coupe and CTS-V Coupe join the lineup next year.

Car and Driver’s twenty-eight annual 10Best Award is the magazine’s highest honor, reserved for entirely new or substantially updated cars, and previous winners. Fifty-eight of the industry’s top new vehicles competed this year in the magazine’s extensive test. The entire 10Best award report appears in the January 2010 edition of the magazine, on newsstands now.